luxadm command for Solaris FC disks

Taken from http://www.tek-tips.com/viewthread.cfm?qid=1183310&page=9

FCAL Disks
luxadm probe (discovers fcal)
luxadm display Enclosure (displays information on fcal box)
luxadm reserve /dev/rdsk/c#t#d#s# (reserves device so it can’t be accessed)
luxadm -e offline /dev/rdsk/c#t#d#s# (takes a device offline)
luxadm -e bus_quiesce /dev/rdsk/c#t#d#s# (quiesce the bus)
luxadm -e bus_unquiesce /dev/rdsk/c#t#d#s# (unquiesce the bus)
luxadm -e online /dev/rdsk/c#t#d#s# (bring the disk device back online)
luxadm release /dev/rdsk/c#t#d#s# (unreserved the device for use)
luxadm remove_device BAD,f2 (removes a device from slot f2 on enclosure BAD)
luxadm insert_device BAD,f2 (hot plug a new device to slot f2 on enclosure BAD)

SSAADM (for old ssa drawers)
ssaadm display c# (displays ssa on controller)
ssaadm display /dev/rdsk/c#t#d#s# (display drive information)
ssaadm start /dev/rdsk/c#t#d#s# (spin up a specific drive)
ssaadm stop /dev/rdsk/c#t#d#s# (spin down a specific drive)
ssaadm start –t 3 c# (spin up all drives in tray 3 on controller )
ssaadm stop –t 3 c# (spin down all drives in tray 3 on controller)
ssaadm start c# (spin up all drives in array)
ssaadm stop c# (stop all drives in array)